Propellant Characteristics: Shape, Burning Rate and Pressure

A. Morphology (Shape) of Propellant

The shape of a powder grain directly affects its burning rate. A larger surface area leads to faster combustion.

Types of Powder Shapes:

  • Flake (disk) – Thin disc-shaped particles
  • Ball (spherical) – Round, spherical particles
  • Flattened ball – Compressed spherical shape
  • Tubular – Cylindrical with hollow centers

Commonly Used Firearms propellant types:

  • Handgun powder: Found as spherical (ball), flattened ball, or disk/flake.
  • Rifle powder: Includes the handgun shapes plus tubular grains.
  • Black powder: Has an irregular shape.
  • Pyrodex (substitute) – irregular shapes

Burning Rate Control: The burning rate is deliberately controlled by the dimensions and shapes of the powder grains, as well as by surface coatings.

Base Composition:

  • Single-base: Made from nitrocellulose.
  • Double-base: Made from nitrocellulose + nitroglycerin.

B. Gun Powder and Internal Ballistic Variables

These factors affect the bullet’s motion within the barrel:

  • Chamber capacity and amount of powder.
  • Burning rate of the powder.
  • Bullet diameter, length, and weight.
  • Barrel length and caliber.
  • Primer uniformity of ignition.

C. Gunshot Residue and Powder Morphology

When a gun is fired, a cone of debris exits the barrel. This debris contains soot (which travels a short distance, a foot or so) and gunpowder particles.

  • Particle Travel Distance: The distance powder particles travel depends on their shape.
    • Spherical (ball) powder travels the farthest.
    • Disk or flake powder travels the least.
    • Flattened ball powder travels an intermediate distance.
  • Generally, powder particles can strike anything within arm’s length of the barrel’s end.

D. Burning Rate and Pressure

During combustion, the burning rate in a direction normal to the surface is uniform over the entire exposed surface (Piobert’s law).

Piobert’s Law: The rate of burning is uniform over the entire exposed surface of the powder grain, progressing in parallel layers.

  • Regressive Burning: Occurs in shapes like solid cylinders and spheres. As they burn, their surface area decreases, leading to a slower burning rate and a decrease in pressure.
  • Progressive Burning: Occurs in pierced cylinders (tubular grains). They burn both on the inside and outside, which tends to maintain a consistent surface area, resulting in a faster burn than solid cylinders.

Note: The thickness of the flake, ball, or the wall of a tubular powder will affect the burning time of the powder. This thickness is sometimes referred to as the “web.”

Pressure-Dependence and Burning Rate Formula:

The burning rate of smokeless powders increases with the pressure of the surrounding gases. The formula is given as

Burning rate [d(s)/d(t)] = B(Pa),

where:

  • s is the size of the grain,
  • t is time,
  • P is pressure,
  • B is the burning rate constant, and
  • a is the pressure index of the particular propellant.

This shows that as pressure increases, the burn rate and subsequent pressure build-up also increase.

Magnum Loadings: High-intensity loadings for magnum rifles use heavy charges of slow-burning powders. This creates a broader time-pressure curve, providing a longer period of effective acceleration for the bullet without exceeding maximum barrel pressure, which can cause a barrel burst with fast-burning powders.

References:

  • Internal Ballistics by Great Britain, Scientific Advisory Council
  • Firearms and Fingerprints by Edward Hueske
  • Practical Analysis and Reconstruction of Shooting Incidents by Edward E. Hueske
  • Firearms, the Law, and Forensic Ballistics by Tom Warlow

Leave a Comment

Your email address will not be published. Required fields are marked *